Data cable, 24 AWG, ISDN, 10 Pair, Screened, PVC, 500m
Part #: ISDN10B
24 AWG Solid Bare Copper Conductors, Polyolefin Insulated, Twinned, Cabled, Overall Aluminium Laminate Screened, PVC Jacketed, 120 Ohm Cable for ISDN and xDSL Applications.
ISDN was one of the first large scale digital transmission architectures implemented in Australia. It was based on multiplexing 64 kBit streams that were carried over the standard analogue telephone cable. Thirty two of these streams made up one PRI (Primary Rate Interface) which ran at 2 MB. Subsequent multiplexing gave streams of 8MB, 32MB and 64 MB. Garlands ISDN cable is predominantly designed to carry this 2MB stream although higher bit rate streams can also be carried. Over time the network migrated to ADSL, xDSL and other technologies. This cable that was originally designed for ISDN can still be used at the 2MB and 8MB rate for these newer and more advanced architectures.
| General | |
| Pack Size | 500m |
| Applicable Standards | AS/AC S008 |
| Suitable Applications | Used as signal transmission and connection of checking appliances of distribution system, computer system |
| ROHS Compliant | Yes |
| A-Tick (Yes/No) | Yes |
| No. Pairs | 10 |
| Conductor Characteristics | |
| AWG | 24 |
| Stranding (mm) | 1/0.5 |
| Area (mm2) | 0.2 |
| Diameter (mm) | 0.5 |
| Material | PACW |
| Insulation | |
| Material | PE |
| Nominal Thickness (mm) | 0.2 |
| Nominal OD (mm) | 0.95 |
| Drain Wire | |
| AWG | 24 |
| Stranding | 1/0.5 |
| Area (mm2) | 0.2 |
| Diameter (mm) | 0.5 |
| Material | TACW |
| Screen | |
| Material | Al. Polyester Tape |
| Coverage (%) | 1 |
| Outer Sheath | |
| Material | PVC |
| Colour | GREY |
| Nominal Thickness (mm) | 0.1 |
| Nominal OD (mm) | 8 |
| Physical Characteristics | |
| Insulation – Elongation at BBA | >300% |
| Outer Sheath – Elongation at BBA | >100% |
| Tensile Strength Before Aging | >12MPa |
| Electrical Properties | |
| Max. Conductor DC Resistance @ 20°C | 89.6Ω/km |
| Min. Insulation Resistance @ 20°C | 1,000 MΩ.km |
| Voltage Test: Conductor to core | 1.5kV ac/1min |
| Voltage Test: Core to sheath | 3.0kV ac/1min |
| Mechanical Properties | |
| Operating Temp Range | -15 to 70°C |
| Max. Recommended Pulling Tension | 274N |
| Min Bend Radius (Install) | 80mm |
| Approximate Mass(kgs/100m) | 8.63kg/100m |
| Supply Information | |
| Supply Information – Pack Type | Wooden Reel |
| Dimensions | W49 x H21.8cm |
Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.