External Telephone, 20 Pair 0.64, UG, Jelly Filled, Poly

Part #: ETC4064JF1000

0.64 mm Solid Bare Copper Conductors, Polyolefin Insulated, Twinned, Unitized in 10 Pair Units with an Identifying Binder, Cabled, Jelly Filled, Overall Wrapped, UV Resistant Polyethylene Jacketed, 20 Pair External Telephone Cable to TS-008

Call 1800 66 99 99

To talk to someone about this product

Garlands ETC range of External Telephone Cable are provided into the Australian market in a number of different options and variants. For underground applications, including direct burial or within duct, Garland offers jelly filled (“JF” suffix) versions to protect against moisture ingress. For termite protection, nylon jacketed (“NJ” suffix) versions are available. If an aerial application is required, integral bearer (“IB” suffix) versions can be developed. In harsh environments or where rodents and rats are an issue, steel wire armoured versions (“SWA” Suffix) can be considered. For use in tunnels or under bridges, Halogen Free jacketed versions are available (“HF” suffix). The ETC product range is available in 0.4 mm, 0.64mm and 0.9 mm sizes in pair sizes from 2 to 100 pair.
Most ETC cables are designed to meet Australian Standards and are RCM compliant.

General
Pack Size 1000m
Applicable Standards AS/ACIF S008
Suitable Applications For telecommunications system
ROHS Compliant Yes
A-Tick (Yes/No) Yes
No. Pairs 20
Conductor Characteristics
Stranding (mm) 1/0.64mm
Area (mm2) 0.32
Diameter (mm) 0.64
Material BC
Insulation
Material Foam Skin
Nominal Thickness (mm) 0.225
Nominal OD (mm) 1.1
Screen
Material Polyester Tape
Coverage (%) 1
Filler
Material Jelly filled
Outer Sheath
Material PE
Colour Black
Nominal Thickness (mm) 1.2
Nominal OD (mm) 15
Electrical Properties
Max. Conductor DC Resistance @ 20°C 58Ω/km
Max. Mutual Capacitance @ 1KHz 49 pF/m
Max. Pair-pair capacitance unbalance 330 pF/100m
Nom. Characteristic Impedance @ 1MHz 110±20Ω
Min. Insulation Resistance @ 20°C 1,000MΩ·km
Mechanical Properties
Operating Temp Range -15°C to +70°C
Max. Recommended Pulling Tension 900N
Min Bend Radius (Install) 150 mm
Approximate Mass(kgs/100m) 21 kg/100m
Supply Information
Supply Information – Pack Type Wooden Reel

Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.