LAN Cable 4 Pair Cat5e UTP jel filled 305m

Part #: UTPL5EJF305R

24 AWG Solid Bare Copper Conductor, Polyethylene Insulated, Twinned, Cabled, Jelly Filled, Polyethylene Jacketed, 4 pair Category 5E UTP Cable

Call 1800 66 99 99

To talk to someone about this product

Category cables are designed to carry high bit rate signals in LAN (Local Area Network) based systems using Ethernet protocols defined by IEEE. Originally designed to operate at 1 MB these systems have evolved over time to the point where they are now able to communicate at bit rates of 1000 MB (also called Gigabit-Ethernet) and above. Category cables are often employed in a STAR network topology. Such cabling is often referred to as Structured Cabling or Structured Wiring and involves using fixed solid conductor cable in horizontal runs radiating from a central MDF to workstation outlets. Category patch cable that has stranded conductors is then used for the last 5 metres of the run to connect the work outlet to the computer or workstation. Standards such as AS/NZS 3080, ISO 11801 and EIA/TIA 568 specify the requirements for the cable and the subsequent channel or link. Typical protocols include 1Base5 (IEEE 802.3e), 10Base-T (IEEE 802.3i), 100Base-TX (IEEE 802.3u) and 1000Base-T (IEEE 802.3ab).
Garland category cable is designed to meet or exceed the necessary standards with many of the products being third part verified for performance by UL or ETL. Category 5E horizontal cables carry the UTPL5E insignia and are available in PVC (standard indoor), Halogen Free (“HF” suffix) and Jelly Filled versions (“JF” suffix) for outdoor and underground installations. Category 6 cables carry the UTPL6 insignia and are also available in the same options. Stranded versions (“MTP” suffix) are available in PVC or halogen free jacket options only.

General
Pack Size 305m
Applicable Standards AS/ACIF S008, UL444, TIA/EIA 568 C.2
Suitable Applications Used in Structured cabling for computer networks such as Ethernet.
ROHS Compliant Yes
A-Tick (Yes/No) yes
No. Pairs 4
Conductor Characteristics
AWG 24
Stranding (mm) 1/0.503
Area (mm2) 0.2
Diameter (mm) 0.503
Material BC
Insulation
Material PE
Nominal Thickness (mm) 0.18
Nominal OD (mm) 0.92
Filler
Material Water resistant flooding compound
Outer Sheath
Material PE
Colour BLACK
Nominal Thickness (mm) 1
Nominal OD (mm) 6.3
Physical Characteristics
Insulation – Elongation at BBA >300%
Outer Sheath – Elongation at BBA >350%
Tensile Strength Before Aging >9.7MPa
Electrical Properties
Max. Conductor DC Resistance @ 20°C 93.8Ω/km
Max. Mutual Capacitance @ 1KHz 56Pf/m
Max. Pair-pair capacitance unbalance 330pF/100m
Nom. Characteristic Impedance @ 1MHz 100±15Ω
Min. Insulation Resistance @ 20°C 10000MΩ.km
Voltage Test: Conductor to core 2.0kV ac/1min
Voltage Test: Core to sheath 4.5kV ac/1min
Mechanical Properties
Operating Temp Range -25 to 70C
Max. Recommended Pulling Tension 111N
Min Bend Radius (Install) 63mm
Approximate Mass(kgs/100m) 4.15kg/100m
Supply Information
Supply Information – Pack Type Wooden Reel
Dimensions W34 x H24.8cm

Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.