LAN Cable 4 Pair Cat6 Jel Filled PE 305m

Part #: UTPL6JFBK305

23 AWG Stranded Bare Copper Conductor, Polyethylene Insulated, Twinned, Cabled, Jelly Filled, Polyethylene Jacketed, 4 pair Category 6 UTP Cable

Call 1800 66 99 99

To talk to someone about this product

×
  • This field is for validation purposes and should be left unchanged.

Category cables are designed to carry high bit rate signals in LAN (Local Area Network) based systems using Ethernet protocols defined by IEEE. Originally designed to operate at 1 MB these systems have evolved over time to the point where they are now able to communicate at bit rates of 1000 MB (also called Gigabit-Ethernet) and above. Category cables are often employed in a STAR network topology. Such cabling is often referred to as Structured Cabling or Structured Wiring and involves using fixed solid conductor cable in horizontal runs radiating from a central MDF to workstation outlets. Category patch cable that has stranded conductors is then used for the last 5 metres of the run to connect the work outlet to the computer or workstation. Standards such as AS/NZS 3080, ISO 11801 and EIA/TIA 568 specify the requirements for the cable and the subsequent channel or link. Typical protocols include 1Base5 (IEEE 802.3e), 10Base-T (IEEE 802.3i), 100Base-TX (IEEE 802.3u) and 1000Base-T (IEEE 802.3ab).
Garland category cable is designed to meet or exceed the necessary standards with many of the products being third part verified for performance by UL or ETL. Category 5E horizontal cables carry the UTPL5E insignia and are available in PVC (standard indoor), Halogen Free (“HF” suffix) and Jelly Filled versions (“JF” suffix) for outdoor and underground installations. Category 6 cables carry the UTPL6 insignia and are also available in the same options. Stranded versions (“MTP” suffix) are available in PVC or halogen free jacket options only.

General
Pack Size 305m
Applicable Standards AS/ACIF S008, UL444, TIA/EIA 568 C.2
Suitable Applications For communication network applications needing up to gigabit networking speeds.
No. Pairs 4
Conductor Characteristics
AWG 23
Stranding (mm) 1/0.57
Area (mm2) 0.255
Diameter (mm) 0.57
Material BC
Insulation
Material PE
Nominal Thickness (mm) 0.22
Nominal OD (mm) 1.025
Filler
Material Jelly Filled
Outer Sheath
Material PE
Colour Black
Nominal Thickness (mm) 1
Nominal OD (mm) 7.3
Physical Characteristics
Insulation – Elongation at BBA >300%
Outer Sheath – Elongation at BBA >400%
Electrical Properties
Max. Conductor DC Resistance @ 20°C 86Ω/km
Max. Mutual Capacitance @ 1KHz 56 pF/m
Max. Pair-pair capacitance unbalance 330 pF/100m
Nom. Characteristic Impedance @ 1MHz 100±15Ω
Min. Insulation Resistance @ 20°C 10000MΩ.km
Voltage Test: Conductor to core 2.0 KV ac/1min
Voltage Test: Core to sheath 4.5 KV ac/1min
Mechanical Properties
Operating Temp Range -15 to 70°C
Max. Recommended Pulling Tension 143 N
Min Bend Radius (Install) 91mm
Approximate Mass(kgs/100m) 8.0 kg/100m

Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.