Multi-Conductor, 7/0.20 mm, 12 Core, Screened, PVC, 100m

Part #: MC712S100

7/0.20 mm Tinned Copper Conductors, PVC Insulated, Cabled, Aluminium Laminate Screened, PVC Jacketed, 12 Core Security, Alarm, Instrumentation and Serial Communications Cable.

Call 1800 66 99 99

To talk to someone about this product

Garlands small conductor EIA RS-232 cables are based on the successful MC7 series but include a screen to protect against electrical interference. Overall aluminium laminate (“S” suffix) or braided wire screen (“BS” suffix) options are standard within this product range. These products are designed for low bit rate serial data applications requiring an unbalanced connection. Typical applications include the interconnection of DTE (Data Terminal Equipment) such as printers, fax’s and consoles. The MC7 “S” series cables can be used in the industrial environment to interconnect PLC’s, sensors, data loggers, keyboards and other peripheral devices. The smaller conductor size make this range an ideal cable for short run applications or where added flexibility is required. This is particularly the case with the braided screen options.
In the domestic environment, this range of products can be used on short runs to connect motion and entry sensors (reed switches) or card readers and door strikes.
For longer distance applications, refer to the MC14 S series.

Pack Size 100m
Applicable Standards AS/ACIF S008, EIA-RS232, UL 758
Suitable Applications For the interconnection of control equipment and Instruments.
ROHS Compliant Yes
A-Tick (Yes/No) yes
No. Cores 12
Conductor Characteristics
AWG 24
Stranding (mm) 7/0.2
Area (mm2) 0.22
Diameter (mm) 0.6
Material TC
Material PVC
Nominal Thickness (mm) 0.28
Nominal OD (mm) 1.2
Drain Wire
AWG 24
Stranding 7
Area (mm2) 0.22
Diameter (mm) 0.2
Material TC
Material Al. Polyester Tape
Coverage (%) 1
Outer Sheath
Material PVC
Colour GREY
Nominal Thickness (mm) 0.8
Nominal OD (mm) 6.9
Physical Characteristics
Insulation – Elongation at BBA >100%
Outer Sheath – Elongation at BBA >100%
Tensile Strength Before Aging >12MPa
Electrical Properties
Max. Conductor DC Resistance @ 20°C 95.3Ω/km
Min. Insulation Resistance @ 20°C 50MΩ.km
Voltage Test: Conductor to core 1.5 kV ac/1min
Voltage Test: Core to sheath 3.0 kV ac/1min
Mechanical Properties
Operating Temp Range -15 to 70°C
Max. Recommended Pulling Tension 184N
Min Bend Radius (Install) 69mm
Approximate Mass(kgs/100m) 7.2kg/100m
Supply Information
Supply Information – Pack Type Plastic Reel
Dimensions 10 x 4.5 x 5.5”

Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.