Multi-Pair, 7/0.20mm, 2 Pair, Individual Screen, PVC, 500m

Part #: MCP2ISGY500W

7/0.25mm Tinned Copper Conductor, Polypropylene Insulated, Twinned, Individually Shielded with an Aluminium Laminate, Cabled, PVC Jacketed, 2 Pair Alarm, Security, Intercomm, Communications and Audio Cable

Call 1800 66 99 99

To talk to someone about this product

MCP2IS is a unique product within Garlands MCP product portfolio. This is a 7/0.25 mm conductor rather than the standard 7/0.20 mm and each pair is individually screened with two individual drain wires. There is no overall screen, just an overall PVC jacket.

This product fulfils demand for a number of applications. It can be used as a standard RS-422 product to interconnect computer DTE devices such as printers, scanners, faxes and modems.

It can be used as a security cable to connect sensors, motion detectors, IR detectors, reed switches, alarm relays, sound sensors and key pads to alarm control units.

It can also be used in intercom and access control systems where a 2 pair cable is required to connect remote devices to the main control panel.

Finally, it can also be used as a microphone or line level cable in an audio installation.

General
Pack Size 500m
Applicable Standards AS/ACIF S008
Suitable Applications Used as signal transmission and connection of checking appliances of distribution system, computer system.
ROHS Compliant Yes
No. Pairs 2
Conductor Characteristics
AWG 22
Stranding (mm) 7/0.25
Area (mm2) 0.343
Diameter (mm) 0.75
Material TC
Insulation
Material PP
Nominal Thickness (mm) 0.2
Nominal OD (mm) 1.2
Drain Wire
AWG 24
Stranding 7
Area (mm2) 0.22
Diameter (mm) 0.2
Material TC
Screen
Material Al. Polyester Tape
Coverage (%) 1
Outer Sheath
Material PVC
Colour GREY
Nominal Thickness (mm) 0.55
Nominal OD (mm) 5
Physical Characteristics
Insulation – Elongation at BBA >150%
Outer Sheath – Elongation at BBA >100%
Tensile Strength Before Aging >12MPa
Electrical Properties
Max. Conductor DC Resistance @ 20°C 55.1Ω/km
Voltage Test: Conductor to core 1.0 kV ac/1min
Mechanical Properties
Operating Temp Range -15 to 70°C
Max. Recommended Pulling Tension 48N
Min Bend Radius (Install) 50mm
Approximate Mass(kgs/100m) 3.9kg/100m
Supply Information
Supply Information – Pack Type Wooden Reel
Dimensions W33 x H21.8cm

Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.