Multi-Pair, 7/0.30mm, 6 Pair, Screened, PVC, 100m

Part #: MCP7036S100

7/0.30mm Bare Copper Conductor, PVC Insulated, Twinned, Cabled, Aluminium Laminate Screened, PVC Jacketed, 6 Pair Instrumentation, Control, Alarm and Security Cable

Call 1800 66 99 99

To talk to someone about this product

MCP703 products use a standard 7/0.30 mm conductor providing a nominal 0.5mm2 conductor area. Used in the industrial segment for instrumentation and control. Typical applications include connection of devices to PLC’s (Programmable Logic Controllers), air-conditioning controllers, thermostats an refrigeration units. These cables can also be used for factory automation systems including interconnection of proximity sensors, reed switches, IR sensors, overcurrent detectors and control signals for DC or AC motor drives. Being PVC insulated and PVC jacketed, these cables are ideal for the indoor or factory environment. Overall screened versions (“S” suffix”) provide moderate screening of electrical interference. For higher screening performance, the individual and collective screened version (“ISCS” Suffix) is available. For areas where there is risk of physical damage, steel wire armoured versions (“SWA” Suffix) can be considered.
Red coloured jacket versions of these cables also find their way into fire alarm system use.

General
Pack Size 100m
Applicable Standards AS/NZS 1125 , AS/NZS 3808 , IEC60332-1
Suitable Applications Used to carry voice and data services, they also serve as the interconnection between electrical equipment and instruments.
ROHS Compliant Yes
No. Pairs 6
Conductor Characteristics
AWG 20
Stranding (mm) 7/0.30
Area (mm2) 0.5
Diameter (mm) 0.91
Material BC
Insulation
Material PVC
Nominal Thickness (mm) 0.32
Nominal OD (mm) 1.65
Drain Wire
AWG 22
Stranding 7
Area (mm2) 0.343
Diameter (mm) 0.75
Material TC
Screen
Material Al. Polyester Tape
Coverage (%) 1
Outer Sheath
Material PVC
Colour BLACK
Nominal Thickness (mm) 1.15
Nominal OD (mm) 11
Physical Characteristics
Insulation – Elongation at BBA >100%
Outer Sheath – Elongation at BBA >100%
Tensile Strength Before Aging >12MPa
Electrical Properties
Voltage Rating 110a.c /150d.c
Max. Conductor DC Resistance @ 20°C 38.4Ω/km
Max. Pair-pair capacitance unbalance 85pF/m
Nom. Characteristic Impedance @ 1MHz 380ohm
Voltage Test: Conductor to core 2.0 kV ac/1min
Mechanical Properties
Operating Temp Range -15 to 90°C
Max. Recommended Pulling Tension 360N
Min Bend Radius (Install) 110mm
Approximate Mass(kgs/100m) 15.8kg/100m

Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.