Multi-Pair, 7/0.40mm, 1 Pair, Screened, PVC, 100m

Part #: MCP7041S100

7/0.40mm Bare Copper Conductor, PVC Insulated, Twinned, Cabled, Aluminium Laminate Screened, PVC Jacketed, 1 Pair Instrumentation, Control, Alarm and Security Cable

Call 1800 66 99 99

To talk to someone about this product

The MCP704 range is a larger version of the standard MCP703 products. With a nominal conductor area of 0.88 mm2 these cables offer extended distance capability without the expense of the traditional 1mm2 conductor size. Used in the industrial segment for instrumentation and control. Typical applications include connection of devices to PLC’s (Programmable Logic Controllers), air-conditioning controllers, thermostats an refrigeration units. These cables can also be used for factory automation systems including interconnection of proximity sensors, reed switches, IR sensors, overcurrent detectors and control signals for DC or AC motor drives. Being PVC insulated and PVC jacketed, these cables are ideal for the indoor or factory environment. Overall screened versions (“S” suffix”) provide moderate screening of electrical interference. For higher screening performance, the individual and collective screened version (“ISCS” Suffix) is available. For areas where there is risk of physical damage, steel wire armoured versions (“SWA” Suffix) can be considered.
Red coloured jacket versions of these cables also find their way into fire alarm system use.

General
Pack Size 100m
Applicable Standards AS/ACIF S008
Suitable Applications For low voltage device connection. Not Suitable for mains connection.
ROHS Compliant Yes
A-Tick (Yes/No) Yes
No. Pairs 1
Conductor Characteristics
AWG 18
Stranding (mm) 7/0.4
Area (mm2) 0.88
Diameter (mm) 1.2
Material PACW
Insulation
Material PVC
Nominal Thickness (mm) 0.3
Nominal OD (mm) 1.85
Drain Wire
AWG 22
Stranding 7/0.25
Area (mm2) 0.343
Diameter (mm) 0.75
Material TACW
Screen
Material Al. Polyester Tape
Coverage (%) 1
Outer Sheath
Material V-90 HT PVC
Colour BLACK
Nominal Thickness (mm) 0.8
Nominal OD (mm) 5.5
Physical Characteristics
Insulation – Elongation at BBA >100%
Outer Sheath – Elongation at BBA >100%
Tensile Strength Before Aging >12MPa
Electrical Properties
Max. Conductor DC Resistance @ 20°C 22.2Ω/km
Min. Insulation Resistance @ 20°C 1000MΩ.km
Voltage Test: Conductor to core 1.5 kV ac/1min
Voltage Test: Core to sheath 3.0 kV ac/1min
Mechanical Properties
Operating Temp Range -15 to 90°C
Max. Recommended Pulling Tension 123N
Min Bend Radius (Install) 62mm
Approximate Mass(kgs/100m) 4.51kg/100m
Supply Information
Supply Information – Pack Type Wooden Reel
Dimensions W24 x H21.8cm

Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.