Multi-Pair, 7/0.50mm, 2 Pair, Screened, PVC, 1000m
Part #: MCP7052S1000
7/0.50mm Bare Copper Conductor, PVC Insulated, Twinned, Cabled, Aluminium Laminate Screened, PVC Jacketed, 2 Pair Instrumentation, Control, Alarm and Security Cable
Call 1800 66 99 99
To talk to someone about this product
MCP705 products use a standard 7/0.50 mm conductor providing a nominal 1.5mm2 conductor area. This is the “big-brother” of the MCP703 range. Used in the industrial segment for instrumentation and control. Typical applications include connection of devices to PLC’s (Programmable Logic Controllers), air-conditioning controllers, thermostats an refrigeration units. These cables can also be used for factory automation systems including interconnection of proximity sensors, reed switches, IR sensors, overcurrent detectors and control signals for DC or AC motor drives. Being PVC insulated and PVC jacketed, these cables are ideal for the indoor or factory environment. Overall screened versions (“S” suffix”) provide moderate screening of electrical interference. For higher screening performance, the individual and collective screened version (“ISCS” Suffix) is available. For areas where there is risk of physical damage, steel wire armoured versions (“SWA” Suffix) can be considered.
MCP705 products are typically used in longer distance or higher current applications when compared to the MCP703 series.
Red coloured jacket versions of these cables also find their way into fire alarm system use.
|Applicable Standards||AS/NZS 1125 , AS/NZS 3808 , IEC60332-1|
|Suitable Applications||Used to carry voice and data services, they also serve as the interconnection between electrical equipment and instruments.|
|Nominal Thickness (mm)||0.32|
|Nominal OD (mm)||2.2|
|Material||Al. Polyester Tape|
|Nominal Thickness (mm)||0.8|
|Nominal OD (mm)||8.8|
|Insulation – Elongation at BBA||>100%|
|Outer Sheath – Elongation at BBA||>100%|
|Tensile Strength Before Aging||>12MPa|
|Max. Conductor DC Resistance @ 20°C||13.6Ω/km|
|Max. Pair-pair capacitance unbalance||270pF/m|
|Nom. Characteristic Impedance @ 1MHz||280ohm|
|Voltage Test: Conductor to core||2.0 kV ac/1min|
|Operating Temp Range||-15 to 90°C|
|Max. Recommended Pulling Tension||384N|
|Min Bend Radius (Install)||88mm|
Image Disclaimer. The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product.